cleaning the canon mp470 printer ink arrester

For details on the remedial action to be taken, see ' Ink Is Not Coming Out.

If there is no sign of improvement after Ink Flush, the ink may have run out or the print head may be worn.

If Ink Flush is run when the remaining ink level is insufficient, it may cause a failure.

Therefore, execute ink flush only when necessary.

Ink Flush consumes an extremely large amount of ink.Įxecuting ink flush frequently will rapidly deplete your printer's ink supply.

When the Ink Flush dialog box opens, select the ink group for which ink flush is to be performed.Ĭlick Initial Check Items to display the items you need to check before performing ink flush.īe sure to check the remaining ink level before running Ink Flush. Consequently, perform cleaning only when necessary.Įxecute Ink Flush if the status does not improve even after Deep Cleaning is performed. When enlarged in the paper feed direction:-Clean grease or oil off the timing slit disk film-Replace the-timing slit disk film,-timing sensor unit, or-logic board.

Deep Cleaning consumes a larger amount of ink than Cleaning.Ĭleaning the print head frequently will rapidly deplete your printer's ink supply. Clean grease or oil off the timing slit strip film-Replace the-timing slit strip film,-carriage unit, or-logic board.

To cancel the check process, click Cancel. To check whether the print quality has improved, click Print Check Pattern. Make sure that the printer is on and then click Execute.Ĭlick OK when the confirmation message appears.Ĭlick OK when the confirmation message is displayed. When the Deep Cleaning dialog box opens, select the ink group for which deep cleaning is to be performed.Ĭlick Initial Check Items to display the items you need to check before performing deep cleaning. Perform deep cleaning when two Cleaning attempts do not resolve the print head problem. Deep Cleaning is more thorough than cleaning.

Cleaning the canon mp470 printer ink arrester